Comcast

Menu
Support XFINITY Home Change the Volume and Settings of Your Home Security System (Houston Only)

Introduction

Beeps, alarms, key presses. Find out how to change the various panel volume options for Houston, TX area systems.

Note: This FAQ is for customers in the Houston, Texas area that purchased XFINITY Home prior to 11/16/11. If you are a customer outside of the Houston, Texas area or purchased XFINITY Home after 11/16/11, please click here.

Security Panel Speaker Volume

Follow these instructions to change the volume of key presses and alarm sounds. The default volume is 8, with 1 being the lowest and 8 the highest.

 

  1. Scroll to System Programming and press Enter.
  2. Enter your Master Code when prompted and press Enter.
  3. Scroll to Siren options and press Enter.
  4. Scroll to Speaker volume and press Enter.
  5. The current volume will flash. Scroll to volume you want and press Enter.
  6. Press Status repeatedly to exit.

Status Beep Volume

Follow these instructions to change the volume of non-alarm beeps. The default value is 7, with 1 being the lowest and 10 the highest.

 

  1. Scroll to System Programming and press Enter.
  2. Enter your Master Code when prompted and press Enter.
  3. Scroll to Siren options and press Enter.
  4. Scroll to Status beep vol and press Enter.
  5. The current volume will flash. Scroll to volume you want and press Enter.
  6. Press Status repeatedly to exit.

 

Security Panel Voice

Follow these instructions to turn the spoken status messages and arming level changes on or off.

 

  1. Scroll to System Programming and press Enter.
  2. Enter your Master Code when prompted and press Enter.
  3. Scroll to Siren options and press Enter.
  4. Scroll to Panel voice and press Enter.
  5. The current status will flash. Scroll to turn on or off and press Enter.
  6. Press Status repeatedly to exit.

Panel Piezo Alarm

Follow these instructions to turn the loud alarms on the siren (the Piezo alarm) on or off.

 

  1. Scroll to System Programming and press Enter.
  2. Enter your Master Code when prompted and press Enter.
  3. Scroll to Siren options and press Enter.
  4. Scroll to Panel piezo alrm and press Enter.
  5. The current status will flash. Scroll to turn on or off and press Enter.
  6. Press Status repeatedly to exit.

Panel Piezo Beeps

Follow these instructions to turn the status beeps sounded on the siren (Panel Piezo beeps) on or off.

 

  1. Scroll to System Programming and press Enter.
  2. Enter your Master Code when prompted and press Enter.
  3. Scroll to Siren options and press Enter.
  4. Scroll to Piezo beeps and press Enter.
  5. The current status will flash. Scroll to turn on or off and press Enter.
  6. Press Status repeatedly to exit.

Find this article at:

http://customer.comcast.com/help-and-support/home-security/change-settings-on-security-panel/